The Beginner’s Guide to Restorations

Posted on Posted in Home Products & Services

Your Deck Stain Questions Answered Refinishing your cedar deck can initially seem to be a daunting task. But it is essential in avoiding the fading and decaying of your wood decking stuff due to harsh weather conditions. With the right knowledge coupled with some helpful tips, you can quickly master re-staining of decks. Here are the responses to a few commonly asked questions. How soon should I stain a brand new cedar deck. You should leave your new deck out in the sun to dry before staining; otherwise, your deck will be too moist to allow proper penetration of the stain. If your deck was assembled in winter, you might need to wait until springtime to stain it.
How I Became An Expert on Services
The best time for staining.
A Beginners Guide To Decks
To get the most life from your cedar deck, you should refinish and clean it every 2-3 years. For staining your deck you require some mild, dry weather. You can wait for about three days after the last rain to allow it to dry and also ensure there is plenty of sunshine following stain application. Do not stain when it is too hot, which can prevent the stain from penetrating. For the best results, apply stain in the morning when it is cool. What to do before staining the deck. First, make sure the deck is in the right condition to be stained. That is, how good is the wood quality? You may need to sand it for a smooth surface if the wood is in need of some re-conditioning. After that, give your deck a proper cleaning to remove as much dirt and preceding coatings as possible. Ensure that you use the appropriate quantity of water-pressure if you decide on a pressure washer, or you run the threat of damaging the wood. Dry it properly after cleaning. What products to use for cleaning. To be able to infuse deep into the wood and clear it back to its original state, you should use oxygen bleach. Oxygen bleach is different from the usual bleach which is incredibly harmful to the brush and can destroy the wood’s condition. Oxygen bleach is a powder that releases oxygen ions into warm water that is hot, creating a deep cleanse solution perfect for wood that is dry. Type of stain used. Deck stains come in three primary groupings: clear, semi-transparent and opaque. Clear deck stains retain the original color of the wood while giving it some defense against bad weather. Nevertheless, their insufficient pigmentation requires that it is re-applied annually to prevent fading of the wood’s natural color. Semi-transparent deck stains provide a greater amount of protection than the former but permit some of the wood colors to come through. These coats provide a UV-blocking protective tint resulting in less frequent applications. On average, reapplications can be done after two years. Solid stains are entirely pigmented to cover up the woods color. This provides the most protection from the sun but peels off with time just like paints. This brings about wearing out, and reapplication should be done once signs of the fading start.